Garagen-Rolltor RH77M | Wärmedämmend & Platzsparend

Garagen-Rolltore RH77M: Die platzsparende und isolierende Lösung

Unser Rolltor aus dem Profil RH77M ist die ideale Wahl für Garagen und Einfahrten, bei denen Wärmedämmung und ein minimaler Platzbedarf im Vordergrund stehen. Das Herzstück dieses Tores ist das doppelwandige Aluminiumprofil, das mit einem FCKW-freien Polyurethanschaum gefüllt ist. Diese Konstruktion bietet entscheidende Vorteile gegenüber einwandigen Toren.

Im Gegensatz zu einem Sektionaltor wickelt sich der Rolltorpanzer kompakt in einem Kasten über der Öffnung auf. Dadurch bleibt die Decke Ihrer Garage komplett frei – ideal für die Lagerung von Gegenständen oder bei geringer Deckenhöhe.

Die Vorteile des schaumgefüllten Profils RH77M:

Effiziente Wärmedämmung: Der Schaumkern schafft eine thermische Trennung, reduziert den Wärmeverlust im Winter erheblich und hält die Garage im Sommer kühler. Das spart Energiekosten, besonders bei direkt ans Haus angebundenen Garagen.
Verbesserter Schallschutz & Laufruhe: Die Füllung absorbiert Schall von außen und sorgt gleichzeitig für einen spürbar leiseren und vibrationsärmeren Torlauf.
Hohe Stabilität: Das schaumgefüllte Profil ist verwindungssteifer und robuster als hohle Lamellen und bietet einen guten Witterungsschutz.
Ästhetik und Vielfalt: Das Profil RH77M bietet eine glatte, moderne Optik und ist in vielen Farben erhältlich, um sich perfekt an Ihre Fassade anzupassen.

Wählen Sie das Rolltor RH77M für die perfekte Kombination aus Energieeffizienz und maximaler Raumnutzung in Ihrer Garage.

Application:

Entrance and garage openings in residential and commercial premises

Order with installation

Design

Slat Profile

Colour Options

RH77M perforated foam-filled profile

White

Brown

Grey

Beige

Green

Blue

Maroon

Silver

Golden oak

RAL 7016 Anthracite grey

Equipment

Standard

Optional

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.

Curtain assembly. Assembly of steel profiles with side locks, preventing slats from disengaging.

End profile with seal. End profile can be fitted with a locking mechanism.

Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.

Manual or automatic drive.

Box for the components.

SWB key-switch for face of wall installation.

SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.

CV01 control box for remote control of one or several rolling shutters.

SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.

Wi-Fi-module for wireless control of electric drives (control signal, NO).

GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.

Transmitter-4 remote control operates four devices.

Transmitter-4PRO-Black remote control operates four automatic devices.

Photocell-N safety photocells consisting of infrared transmitter and receiver.

Lamp-PRO-series LED lamp with antenna.

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Parameters

Value

Opening height, mm

from 1 000 to 4 500

Opening width, mm

from 1 000 to 5 200

Maximum door curtain area, sqm

Headroom, mm

from 250 (face of wall installation)

Sideroom clearance, mm

from 83 (face of wall installation)

Hood side cap RK250S, RK300, RSK300, RK375
Bearing support BS100, BS42
3a. Guiding roller RU77 (RV77)
Bearing BR28, BR42
Universal capsule KP60, KPU60, KPU70, KPU70S, KPU102
Octagonal shaft RV60, RV70, RV102
Security lock ring RD60, RD70
Hood RB250, RB300, RB375
Automatic lock RB4
Tubular motor
Headplate BU100K
Guide rail RG83MS, RG90E, RG90MS, RG100
Plug PB14
End lock SL77
End profile RA77EM, RA77KN, RA70E
Slat (curtain) RH77M
Key lock switch SWM, SWK
Key switch SWB, SWH

Rolling doors operated with cord crank. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank.

Rolling doors doors operated with rod crank. Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain.

Rolling doors with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft.

Parameter	Value	Notes
Material	aluminium, foam
Slats weight, kg/rmt	0,37
Slats weight, kg/sqm	4,8
Number of slats per 1 m of curtain height, pcs	13
Maximum door curtain width, m	5 200
Maximum door curtain area, sqm	18

Correct installation and operation of rolling doors guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:

Only qualified personnel trained at DoorHan training centers should install roll-up doors or rolling shutters.

Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.

Rolling doors should open smoothly without jolts or jamming.

Use only specified equipment for opening and closing of the doors.

Don’t exert pressure exceeding 100 N when opening the rolling doors.

Partial opening or closing of the doors, especially with large curtain area (curtain size more than 3,000 x 2,000 mm), is undesirable.

If the rolling door is equipped with a mechanical lock or a latch lock unlock it before opening the doors.

If rolling doors are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling doors. If the operated rolling door is large use emergency manual drive only for closing.

Follow the corresponding operation and installation instructions when using an electric motor.

Do NOT permit children to play on, near the operating area, or with the rolling doors or to operate controls.

Keep door/window opening clear of people and animals while operating the shutters.

Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.

Don’t strike the shutter curtain or obstruct its movement.

Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.

Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be a communication describing the arisen problem which can be documented).

In winter, in case of ice coating of rolling door parts, it’s necessary to pre-tap the door curtain perimeter to release it of ice before operating the door. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).

Carry out rolling door maintenance at least once a year.

Should the rolling door be used for other purposes or should its size exceed the recommended one, the manufacturer holds no responsibility for its integrity and correct operation.

Adjustments or repairs must be made by a trained technician using proper tools and instructions.

Additional Information print

Foam-filled slat profile can be combined with the fenestrated profile of RHE78G series.

Warranty print

DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.

New Products

New steel side covers RS137 and RSK300, made of galvanized steel, have high anti-corrosion properties and strength characteristics, and are painted in the color of the box.

Reinforced guide profile RG100.

New reliable packaging.