Schiebetürantriebe SLIDING-500PRO & 800PRO

Schiebetorantriebe SLIDING-500PRO und 800PRO – Verstärkte Antriebe für Hoftore

Die Schiebetorantriebe der PRO-Serie mit 500 und 800 kg Zugkraft bieten eine erweiterte mechanische Belastbarkeit für anspruchsvolle Einfahrten an Privathäusern, Wohnanlagen und Gewerbeobjekten. Die verstärkte Getriebestufe sorgt für ruhigen Lauf und hohe Standzeit.

Das formschöne Gehäuse aus schlagzähem Polymer schützt Motor und Steuerelektronik vor Regen, Frost und direkter Sonneneinstrahlung. Berührungslose Magnetendschalter garantieren millimetergenaue Abschaltung in den Tor-Endlagen ohne mechanischen Verschleiß.

Mit der Notentriegelung per persönlichem Schlüssel kann das Tor bei Stromausfall mühelos von Hand verschoben werden. Die Elektronik unterstützt Hinderniserkennung und Sicherheitslichtschranken.

Häufig gestellte Fragen

Was unterscheidet die PRO-Variante von Standard-Antrieben?

Die PRO-Baureihe besitzt ein verstärktes Getriebegehäuse und optimierte Komponenten für höhere Schaltzyklen.

Wie wird der Antrieb vor unbefugtem Verstellen geschützt?

Die Notentriegelung ist durch ein Zylinderschloss geschützt, sodass nur berechtigte Personen mit Schlüssel den Freilauf aktivieren können.

Einsatzbereiche:

Tore aller Art

Schiebetore mit beliebiger Füllung

Mit Montage bestellen

Design

OPERATOR DESIGN

The upper one-piece part of the body is made of impact-resistant plastic.

Special release mechanism

The lower part of the drive is made of high-strength aluminum alloy

Ausstattung

Standardausführung

Optionales Zubehör

DoorHan gewährt eine Werksgarantie von 3 Jahren ab Kaufdatum auf alle Antriebe.

The remote controller TRANSMITTER 2-PRO-BLACK is used for the remote control of two automatic devices

The remote controller TRANSMITTER 4-PRO-BLACK is used for remote control of four automatic devices

The remote controller TRANSMITTER 4 is used for remote control of four automatic devices

Remote controllers TRANSMITTER 4-COLOR are designed for remote control of four automatic devices

Wireless control button COMMAND-433 is designed for remote control of two automatic devices

Pushbutton switch with return mechanism SWITCH is designed to send a control command to the drive control unit

The KEYPAD is used for remote control of the drive equipped with a built-in or external DoorHan receiver

The key-button KEYSWITCH_N sends a control command to the control unit of the automatic system by the turn of the key

Anti-vandal code keypad KEYCODE is used to control an automatic device and as an external keypad or a proxy card reader

The GSM module is designed to receive a signal from a mobile phone and transmit a control command to start an electric drive or a barrier

The external radio receiver DHRE-1 is designed to control automation from other manufacturers using the DoorHan remote control

WI-FI-module is designed for wireless control (generation of NO control signal) by electric drives

Signal LED lamp with antenna LAMP-PRO is designed to notify about the movement of the door

Safety photocells PHOTOCELL-N consists of an infrared transmitter and receiver

PHOTOCELL-PRO wireless safety photocells with swivel board for asymmetric openings, consisting of an infrared transmitter and receiver

SIRENA is designed for sound notification of door movement

The HEATER is used for heating electric drives of doors and barriers when operating at low temperatures

Technische Beschreibung

Konstruktion

Technische Daten

Betriebsbedingungen

The top cover of the drive
Control board PCB-SL
Drive inner cover
Operator stator assembly with aluminum drive box
Drive rotor
Drive capacitor
Lower part of the operator box
The working shaft of the operator with gear and bearings assy
Neodymium magnetic limit switch
Side cover of the drive
Gear
New magnet stand
Set of remote readers of limit switches
Release unit
Release keys

Parameter	Wert	Hinweise
Maximum gate weight, kg	500/800
Versorgungsspannung, V	220–240
Maximum effective torque, N·m	16/20
Leistung, W	260/280
Betriebstemperaturbereich, °C	-20...+55
Door opening speed, m/min	10/12
Schutzart IP	54
Einschaltdauer, %	50	At temperature t = 20 °C

1. Before the installation of the operator, make sure that the door operates smoothly.

2. Ensure that the climatic conditions of the place of operation corresponds with the characteristics of the operator.

3. It is forbidden to install the equipment in rooms with flammable substances or hazardous environments.

4. Make sure that there is no pinching of objects between the moving and fixed parts of the operator when the door moves.

5. It is necessary to use additional accessories only from DoorHan in order to avoid the damage of the operator.

6. It is forbidden to leave the electric motor in the disengaged state.

7.The operator must not be used if repair or adjustment is necessary.

8. Make sure that there are no objects in the area of the electric operator before starting it.

9. Driving and passing is allowed only when the door is stopped and the operator is switched off.

10. Do not let children use the operator and accessories.

11. It is forbidden to make changes to the automatic part.

Zusatzinformationen Drucken

Neodymium magnetic limit switches of a new generation ensure the accuracy of limit switches in extreme positions.

Safe use: the multifunctional control unit makes it possible to connect photocells for opening/closing the gate and a signal lamp.

Ability to adjust the force, auto-closing and separate control for ease of use.

The built-in receiver allows you to register up to 60 remotes.

Garantie Drucken