Counter Shutters of RHS75, RHS75P Steel Profile

Roller shutters made from steel profiles RHS75, RHS75P are used to protect openings from burglary and adverse weather conditions. They fully comply with Russian and European quality and safety standards and are adapted for use in various climatic conditions. To extend the service life, metal parts are galvanized and painted to ensure resistance to corrosion and aggressive environments.

Application:

Warehouse and industrial openings

Entrance and garage openings

Order with installation

Design

Steel profiles for roller shutters

Primary colors

RHS75

RHS75P

White

Brown

Grey

Beige

Green

Blue

Burgundy

Silver

Galvanized

Anthracite grey

Equipment

Standard

Optional

Box assembled. It is an assembled protective box with side covers, a shaft and capsules, and a control mechanism.

The canvas is assembled. A sheet of steel profile with side locks that prevent the profile from diverging. The canvas can be combined - from a solid and perforated profile.

End profile with seal. Locking mechanisms can be installed in the end profile.

Set of guide profiles with seal.

Internal electric drive.

Box with complete set.

Key switch SWB

Key-button SWM for sending a control command to the electric drive control unit by turning the key

Control unit CV01 for remote control of one roller shutter or a group of roller shutters

SmartRoll control unit for remote control of internal roller shutter electric drives using DoorHan remote controls

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control

GSM module for receiving a signal from a mobile phone and transmitting a control command to start the electric drive

Remote control

Photocell-N safety photocells consisting of an infrared transmitter and receiver

Technical description

Size Table

Construction

Specifications

Operating Conditions

Parameters

Value

Opening height, mm

From 1,000 to 4,000

Opening width, mm

From 1,000 to 4,000

Maximum door curtain area, sqm

Headroom, mm

From 300 (surface mounting)

Sideroom clearance, mm

From 90 (surface mounting)

Side cover RSK300, RSK330, RK375
Protective box RBN300, RBN330, RBN375
Guide roller RV77
BU100K drive mounting plate
Side lock SL75
Guide profile RG90E
Intrashaft electric drive
Octagonal shaft RV102
Universal capsule KPU102
Bearing BS32
Profile (canvas) RHS75, RHS75P

Parameter	Value	Notes
	Steel profile RHS75/RHS75P
Material	Galvanized steel 0.8 mm thick
Slats weight, kg/rmt	0.774/0.655
Slats weight, kg/sqm	10.32/8.73
Number of slats per 1 m of curtain height, pcs	13
Maximum door curtain width, m	4,000
Maximum door curtain area, sqm	16

Properly installed and operated roller shutters guarantee reliable and durable operation. To extend the life of your roller shutters, follow these instructions.

1. Installation of roller shutters and roller shutters must be carried out by qualified specialists who have been trained by the DoorHan concern.

2. Installation of the product must be carried out strictly in accordance with the installation instructions for roller shutters and the technical documentation of the DoorHan concern.

3. Roller shutters should open smoothly without jerking or jolting.

4. To raise and lower structures, use only controls designed for this purpose.

5. Do not use more than 100 N force to open the roller shutters.

6. Partial raising or lowering of the roller shutter leaf is not recommended, especially for large structures (size more than 3,000 × 2,000 mm).

7. If a mechanical lock or latch is used in the design, lifting the blade when the lock is closed is prohibited.

8. When using a cardan drive, when rotating, the knob should be held at an angle of 45°. According to EN 12453 or 12604, a manual force of 390 N is permissible. In the case of large roller shutters, the emergency manual drive (hinge, cardan) is only suitable for closing.

9. When using an automatic drive, follow the instructions supplied with the drive.

10. Keep children away from roller shutter control devices (buttons, remote controls).

11. Make sure that people and animals are not within the range of the roller shutters while they are opening or closing.

12. It is strictly prohibited to stand under the structure while it is in operation, as this can lead to injury.

13. Do not subject the roller shutters to impacts or interfere with their free opening and closing.

14. Make sure that while moving the roller shutter leaf there are no foreign objects in the opening, as this may lead to damage to the structure.

15. It is prohibited to install additional equipment or accessories, as well as to independently replace or adjust individual parts, without consultation with the manufacturer (consultation is considered to be a request that contains a clear description of the problem that has arisen, which can be documented).

16. In winter, in case of icing of parts of the roller shutter or roller shutter structure, before raising and lowering the canvas, it is first necessary to tap the structure along the contour until the parts of the structure are completely free of ice, paying special attention to the condition of the junction of the bottom strip of the product with the window sill or floor, they also must be cleaned.

17. It is necessary to carry out regular maintenance of roller shutters, at least once a year.

18. If roller shutters are used for purposes other than their intended purpose or structures whose dimensions exceed those recommended by the manufacturer, the manufacturer is not responsible for their integrity and proper operation.

19. Diagnostics and repair of roller shutter or roller shutter structures should be carried out only by qualified specialists.

Additional Information print

On large openings, deflection in the upper and lower parts of the canvas is acceptable, which is a feature of single-wall steel profiles.

Warranty print

The buyer is provided with a performance guarantee for roller shutter systems produced by the DoorHan concern for a period of 1 year from the date of purchase of this product. In case of damage to the paintwork as a result of the influence of climatic factors, natural phenomena, the release of fine solid particles or other aggressive substances, corrosion from scratches and chips that occur during operation, the warranty for the paintwork becomes invalid.

Design

Steel profiles for roller shutters

RHS75

RHS75P

Primary colors

White

Brown

Grey

Beige

Green

Blue

Burgundy

Silver

Galvanized

Anthracite grey

Equipment

Standard

Box assembled. It is an assembled protective box with side covers, a shaft and capsules, and a control mechanism.

The canvas is assembled. A sheet of steel profile with side locks that prevent the profile from diverging. The canvas can be combined - from a solid and perforated profile.

End profile with seal. Locking mechanisms can be installed in the end profile.

Set of guide profiles with seal.

Internal electric drive.

Box with complete set.

Optional

Key switch SWB

Key-button SWM for sending a control command to the electric drive control unit by turning the key

Control unit CV01 for remote control of one roller shutter or a group of roller shutters

SmartRoll control unit for remote control of internal roller shutter electric drives using DoorHan remote controls

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control

GSM module for receiving a signal from a mobile phone and transmitting a control command to start the electric drive

Remote control

Photocell-N safety photocells consisting of an infrared transmitter and receiver

Technical description

Size Table

Parameters

Value

Opening height, mm

From 1,000 to 4,000

Opening width, mm

From 1,000 to 4,000

Maximum door curtain area, sqm

Headroom, mm

From 300 (surface mounting)

Sideroom clearance, mm

From 90 (surface mounting)

Construction

Side cover RSK300, RSK330, RK375
Protective box RBN300, RBN330, RBN375
Guide roller RV77
BU100K drive mounting plate
Side lock SL75
Guide profile RG90E
Intrashaft electric drive
Octagonal shaft RV102
Universal capsule KPU102
Bearing BS32
Profile (canvas) RHS75, RHS75P

Specifications

Parameter	Value	Notes
	Steel profile RHS75/RHS75P
Material	Galvanized steel 0.8 mm thick
Slats weight, kg/rmt	0.774/0.655
Slats weight, kg/sqm	10.32/8.73
Number of slats per 1 m of curtain height, pcs	13
Maximum door curtain width, m	4,000
Maximum door curtain area, sqm	16