Theken-Rolltor RHE58M | Sicher, Robust & Ästhetisch

Theken-Rolltor RHE58M: Die massive Sicherung für Ihren Verkaufsbereich

Das Rolltor aus dem Strangpressprofil RHE58M ist die Premium-Lösung zur sicheren und optisch ansprechenden Abtrennung von Theken, Bars, Empfangsbereichen oder Verkaufsfenstern. Im Gegensatz zu rollgeformten Profilen besteht das RHE58M aus massivem, dickwandigem Aluminium. Diese Strangpress-Technik bietet einen signifikant höheren Widerstand gegen Aufhebelversuche und Vandalismus.

Es ist die ideale Wahl für den Ladenbau, die Gastronomie oder in öffentlichen Einrichtungen, wo nach Geschäftsschluss ein zuverlässiger Schutz von Waren und Inventar gefordert ist, ohne die Ästhetik zu beeinträchtigen.

Die Vorteile des Profils RHE58M:

Erhöhter Einbruchschutz: Das massive, stranggepresste Aluminium ist extrem verwindungssteif und bietet einen hohen Widerstand gegen gewaltsame Einwirkungen.
Elegante Optik: Die glatte und hochwertige Oberfläche der Profile sorgt für ein modernes und professionelles Erscheinungsbild, das sich perfekt in anspruchsvolle Innenarchitekturen einfügt.
Hohe Langlebigkeit: Das Profil ist korrosionsfrei, witterungsbeständig und für eine hohe Nutzungsfrequenz ausgelegt, was einen wartungsarmen Betrieb über viele Jahre garantiert.
Kompakte Bauweise: Wie bei einem Rolltor üblich, wickelt sich der Panzer platzsparend im Kasten auf und maximiert so den freien Durchgang im Thekenbereich.

Sichern Sie Ihren Geschäftsbereich effektiv und stilvoll. Das Theken-Rolltor RHE58M verbindet höchste Stabilität mit einem repräsentativen Design.

Application:

Large window facades and shop windows in shopping and entertainment centers

Order with installation

Design

Slat Profile

Colour Options

RHE58M double-skin extruded profile

White

Brown

Grey

Beige

Green

Blue

Maroon

Silver

RAL 1007 Daffodil yellow

RAL 1013 Oyster white

RAL 1015 Light ivory

RAL 1017 Saffron yellow

RAL 1019 Grey beige

RAL 3004 Purple red

RAL 3020 Traffic red

RAL 5011 Steel blue

RAL 7016 Anthracite grey

RAL 7035 Light grey

RAL 8017 Chocolate brown

RAL 8019 Grey brown

RAL 9005 Jet black

Equipment

Standard

Optional

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.

Curtain assembly. Assembly of steel profiles with side locks, preventing slats from disengaging.

End profile with seal. End profile can be fitted with a locking mechanism.

Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.

Manual or automatic drive.

Box for the components.

SWB key-switch for face of wall installation.

SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.

CV01 control box for remote control of one or several rolling shutters.

SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.

Roll 1/2 control box for remote control of tubular motors with DoorHan remote transmitters.

GC2/GC4 control boxes for several shutters control. GC2 box controls two motors with one switch; GC4 box — controls four motors.

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.

Wi-Fi-module for wireless control of electric drives (control signal, NO).

GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.

T5 remote transmitter can operate five rolling shutters.

Transmitter-4 remote control operates four devices.

Transmitter-4PRO-Black remote control operates four automatic devices.

Photocell-N safety photocells consisting of infrared transmitter and receiver.

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Parameters

Value

Opening height, mm

from 500 to 5 000

Opening width, mm

from 600 to 5 000

Maximum door curtain area, sqm

Headroom, mm

from 180 (face of wall installation)

Sideroom clearance, mm

from 65 (face of wall installation)

Hood side cap RK180, RK205, RK250, RK250S, RK300, RSK300, RK375
Bearing support BS100, BS42
Entry guide device RU65
3a. Guiding roller RU77 (RV77)
Bearing BR28, BR42
Universal capsule KP60, KPU60, KPU70, KPU70S
Octagonal shaft RV60, RV70, RV102
Security lock ring RD60, RD70
Hood RB180, RB205, RB250, RB300, RB375
Automatic lock RM2, RM3
Tubular motor
Headplate BU100K
Guide rail RG65M, RG65MS, RG65BS, RG70M, RG70MS, RG70BS
Plug PB14
End lock SLE58M
End profile RA50EM, RA58KN
Slat (curtain) RHE58M
Key lock switch SWM, SWK
Key switch SWB, SWH

Rolling shutters operated with strap, rope or cord crank. Easy to operate strap crank is used with light weight shutters weighing less than 15 kg. Shutter curtain is raised and lowered by the strap tension. Rope crank operates shutters weighing less than 20 kg. Turning the handle of the rope winder operates shutter curtain. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank.

Rolling shutters operated with rod crank. Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain.

Rolling shutters with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft.

Parameter	Value	Notes
	RHE58M
Material	aluminium
Slats weight, kg/rmt	0,319
Slats weight, kg/sqm	5,5
Number of slats per 1 m of curtain height, pcs	17
Maximum door curtain width, m	5
Maximum door curtain area, sqm	14

Correct installation and operation of rolling shutters guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:

Only qualified personnel trained at DoorHan training centers should install roll-up doors or rolling shutters.

Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.

Rolling shutters should open smoothly without jolts or jamming.

Use only specified equipment for opening and closing of the shutters.

Don’t exert pressure exceeding 100 N when opening the rolling shutters.

Partial opening or closing of the shutters, especially with large curtain area (curtain size more than 3 000 x 2 000 mm), is undesirable.

If the rolling shutter is equipped with a mechanical lock or a latch lock unlock it before opening the shutters.

If rolling shutters are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling shutters. If the operated rolling shutter is large use emergency manual drive only for closing.

Follow the corresponding operation and installation instructions when using an electric motor.

Do NOT permit children to play on, near the operating area, or with the rolling shutters or to operate controls.

Keep door/window opening clear of people and animals while operating the shutters.

Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.

Don’t strike the shutter curtain or obstruct its movement.

Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.

Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be a communication describing the arisen problem which can be documented).

In winter, in case of ice coating of rolling shutter parts, it’s necessary to pre-tap the shutter curtain perimeter to release it of ice before operating the shutters. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).

Carry out rolling shutter maintenance at least once a year.

Should the rolling shutters be used for other purposes or should their size exceeds the recommended one, the manufacturer holds no responsibility for their integrity and correct operation.

Adjustments or repairs must be made by a trained technician using proper tools and instructions.

Additional Information print

Use roll-up doors/rolling shutters made of RH77 or RHE84 profile only for installation in entrance, garage or drive-through openings and in regions with high wind load.

Warranty print

DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.

New Products

New steel side covers RS137 and RSK300, made of galvanized steel, have high anti-corrosion properties and strength characteristics, and are painted in the color of the box.

Expansion of the range of end roller shutter profiles - profile RA58KN015. The new end profile is black and more economical compared to RA50EN.

New reliable packaging in white five-layer cardboard.