Catalog

Rollen- und Führungssystem für kaltgewalzten Träger 138x144x6, L=8000mm

Schwerlast-Führungssystem für Trägerprofil 138x144x6 mm

Unser Rollen- und Führungssystem für das Kaltprofil 138x144x6 mm ist unsere absolute High-End-Schwerlastlösung. Es wurde für die größten und schwersten freitragenden Schiebetorkonstruktionen im industriellen Sektor entwickelt, wie sie beispielsweise bei Flugzeughangars oder großen Werft- und Logistiktoren zum Einsatz kommen. Mit einer Trägerlänge von 8000 mm ist dieses System darauf ausgelegt, Torgewichte im Tonnenbereich sicher aufzunehmen und präzise zu führen.

Das System besteht aus massiven, überdimensionierten Rollenapparaten und Führungselementen, die perfekt auf die Geometrie dieses Trägers abgestimmt sind. Es garantiert eine unübertroffene Langlebigkeit und Zuverlässigkeit, selbst im härtesten Dauereinsatz und bei extremen Witterungsbedingungen.

Die Vorteile des Schwerlast-Systems:

  • Maximale Tragfähigkeit: Speziell dimensioniert für die extremen Lasten, die durch das 138x144x6 mm Profil und 8m Länge entstehen.
  • Höchste Präzision: Trotz der enormen Gewichte sorgen hochwertige Lager für einen relativ leichtgängigen und absolut spurtreuen Lauf.
  • Extreme Robustheit: Gefertigt für den industriellen Dauereinsatz, korrosionsbeständig und wartungsarm.
  • Perfekte Abstimmung: Alle Komponenten sind exakt auf das Trägerprofil abgestimmt, um Spiel und Verschleiß zu minimieren.
Equipment
Standard
Beam 138 x 144 x 6, L = 8,000 mm

Beam 138 x 144 x 6, L = 8,000 mm

Roller bearings - 2 pcs.

Roller bearings - 2 pcs.

Bottom catcher with a valve - 1 pc.

Bottom catcher with a valve - 1 pc.

Guide devices - 2 pcs.

Guide devices - 2 pcs.

Covers for the beam - 2 pcs.

Covers for the beam - 2 pcs.

Technical description
Standard Construction
Specifications
Operating Conditions

It is possible to install doors with openings to the left or right side.

It is possible to install doors with openings to the left or right side.

Parameter Value Notes
Load capacity, kg (kN) 1 200

1. Proper installation and operation of components ensure reliable and durable operation. During operation it is necessary:

1.1. Carry out an external inspection of the product every 6 months after the installation of the system.

1.2. During external inspection, make sure that the elements are firmly attached to the door leaf, that there are no external mechanical damages, and that there are no places with weak connections.

1.3. Operation of roller and guide systems is permitted at an ambient temperature of -30 to +40°C and a relative humidity of 75%.

2. When operating systems of rollers and guides for cold-rolled beams 138 x 144 x 6, L = 8,000 mm, IT IS FORBIDDEN:

2.1. Hit or damage the roller bearings.

2.2. During the cleaning of components, use substances that can cause damage to surfaces.

2.3. Installation of equipment not provided by the manufacturer that changes the weight, wind and other loads of the structural elements of the configuration. Any interference with the manufacturer's standard solutions can lead to a loss of strength characteristics of the structure.

Warranty print

The buyer is provided with a guarantee of the reliability of operation of the complete set of sliding doors manufactured by DoorHan for 1 year from the date of purchase.

Equipment
Standard
Beam 138 x 144 x 6, L = 8,000 mm

Beam 138 x 144 x 6, L = 8,000 mm

Roller bearings - 2 pcs.

Roller bearings - 2 pcs.

Bottom catcher with a valve - 1 pc.

Bottom catcher with a valve - 1 pc.

Guide devices - 2 pcs.

Guide devices - 2 pcs.

Covers for the beam - 2 pcs.

Covers for the beam - 2 pcs.

Technical description
Standard Construction

It is possible to install doors with openings to the left or right side.

It is possible to install doors with openings to the left or right side.

Specifications
Parameter Value Notes
Load capacity, kg (kN) 1 200
Operating Conditions

1. Proper installation and operation of components ensure reliable and durable operation. During operation it is necessary:

1.1. Carry out an external inspection of the product every 6 months after the installation of the system.

1.2. During external inspection, make sure that the elements are firmly attached to the door leaf, that there are no external mechanical damages, and that there are no places with weak connections.

1.3. Operation of roller and guide systems is permitted at an ambient temperature of -30 to +40°C and a relative humidity of 75%.

2. When operating systems of rollers and guides for cold-rolled beams 138 x 144 x 6, L = 8,000 mm, IT IS FORBIDDEN:

2.1. Hit or damage the roller bearings.

2.2. During the cleaning of components, use substances that can cause damage to surfaces.

2.3. Installation of equipment not provided by the manufacturer that changes the weight, wind and other loads of the structural elements of the configuration. Any interference with the manufacturer's standard solutions can lead to a loss of strength characteristics of the structure.

Warranty

The buyer is provided with a guarantee of the reliability of operation of the complete set of sliding doors manufactured by DoorHan for 1 year from the date of purchase.

Checkout
Managers of the company will answer all
questions by phone: