Catalog

Mineral wool board DOORHAN “FACADE”

Mineralwolle-Dämmplatte „FACADE“: Die High-Performance Lösung für WDVS

Die Dämmplatte „FACADE“ von DoorHan ist unsere Premium-Putzträgerplatte, die für den Einsatz in Wärmedämm-Verbundsystemen (WDVS) auf höchstem Niveau entwickelt wurde. Wenn Sie kompromisslose Leistung in Bezug auf Energieeffizienz, Schallschutz und vor allem Brandschutz suchen, ist diese Platte die erste Wahl. Sie wurde speziell für den Neubau und die Sanierung von Objekten konzipiert, bei denen nur die besten Materialien zum Einsatz kommen sollen.

Dank ihrer hohen Rohdichte und optimierten Faserstruktur bietet sie eine extrem stabile und haftfeste Oberfläche für den Putzauftrag und garantiert eine maximale Lebensdauer der Fassade.

Die Premium-Vorteile der „FACADE“-Platte:

  • Exzellente Wärmedämmung: Erreicht höchste Dämmwerte und sorgt für maximale Einsparungen bei den Heizkosten und einen überlegenen sommerlichen Hitzeschutz.
  • Kompromissloser Brandschutz (A1): Als Mineralwolleprodukt mit hohem Schmelzpunkt (> 1000 °C) ist sie nicht brennbar und bietet den bestmöglichen passiven Brandschutz.
  • Überlegener Schallschutz: Die hohe Dichte der Platte absorbiert Schall von außen (z.B. Verkehrslärm) deutlich effektiver als leichtere Dämmstoffe.
  • Hohe Abreißfestigkeit: Gewährleistet eine extrem stabile und dauerhafte Verbindung mit dem Putzsystem, auch bei hohen Belastungen.
  • Dampfdiffusionsoffen: Sorgt für ein gesundes Raumklima, da Feuchtigkeit aus dem Mauerwerk entweichen kann ("atmungsaktive Wand").

Wählen Sie die „FACADE“ Dämmplatte für eine Fassadendämmung, die über Jahrzehnte hinweg höchste Performance liefert.

Application:
Facade systems with a thick plaster layer
Facade systems with a thin plaster layer
Advantages
Dimensional stability
Allows to carry out installation of plates with the most dense prileganiye to each other.
Chemical resistance
The resistance of cotton wool to the action of solvents and oils allows it to be safely used with any building materials.
Fire resistance
Mineral wool is a non-combustible material and helps to maintain the integrity of the building in the event of a fire.
High resistance to mechanical stress
Allows the use of mineral wool without shrinkage throughout the entire service life.
Dimensional stability
Allows to carry out installation of plates with the most dense prileganiye to each other.
Chemical resistance
The resistance of cotton wool to the action of solvents and oils allows it to be safely used with any building materials.
Fire resistance
Mineral wool is a non-combustible material and helps to maintain the integrity of the building in the event of a fire.
High resistance to mechanical stress
Allows the use of mineral wool without shrinkage throughout the entire service life.
Technical description
Size Table
Specifications
Parameters
Value
Length, mm
1 200
Width, mm
600
Thickness, mm
from 40 to 160 in 10 mm increments
Packaging volume, m³
from 0.094 to 0.18 (depending on board thickness)
Parameter Value Notes
Density, kg/m³ 150
Thermal conductivity, W/(m K), not more than at a temperature of 10 ˚С λ10 = 0.039 at a temperature of 10 ˚С (283±1) K, no more
Thermal conductivity, W/(m K) λ25 = 0.040 at a temperature of 25 ˚С (298±1) K, no more
Thermal conductivity, W/(m K) λА = 0.041 calculated) for operating conditions A and B according to SP 50-13330-2012, no more
Thermal conductivity, W/(m K) λБ = 0.042 calculated) for operating conditions A and B according to SP 50-13330-2012, no more
Compressive strength, kPa 50 for compression at 10% relative deformation, not less than
Tensile strength, kPa 15 when stretched perpendicular to the front surfaces (separation of layers), not less than
Water absorption, kg/sqm 1,0 with short-term partial immersion, no more
Content of organic substances, % 4,5 by weight, no more
Humidity, % 0,5 by weight, no more
Vapour permeability, mg/m·h·Pa 0,5 no more
Combustibility class according to European Standards NG
Warranty print

If the consumer maintains the rules of transportation and storage, the warranty shelf life of the plates is six months from the date of manufacture.

Technical description
Size Table
Parameters
Value
Length, mm
1 200
Width, mm
600
Thickness, mm
from 40 to 160 in 10 mm increments
Packaging volume, m³
from 0.094 to 0.18 (depending on board thickness)
Specifications
Parameter Value Notes
Density, kg/m³ 150
Thermal conductivity, W/(m K), not more than at a temperature of 10 ˚С λ10 = 0.039 at a temperature of 10 ˚С (283±1) K, no more
Thermal conductivity, W/(m K) λ25 = 0.040 at a temperature of 25 ˚С (298±1) K, no more
Thermal conductivity, W/(m K) λА = 0.041 calculated) for operating conditions A and B according to SP 50-13330-2012, no more
Thermal conductivity, W/(m K) λБ = 0.042 calculated) for operating conditions A and B according to SP 50-13330-2012, no more
Compressive strength, kPa 50 for compression at 10% relative deformation, not less than
Tensile strength, kPa 15 when stretched perpendicular to the front surfaces (separation of layers), not less than
Water absorption, kg/sqm 1,0 with short-term partial immersion, no more
Content of organic substances, % 4,5 by weight, no more
Humidity, % 0,5 by weight, no more
Vapour permeability, mg/m·h·Pa 0,5 no more
Combustibility class according to European Standards NG
Warranty

If the consumer maintains the rules of transportation and storage, the warranty shelf life of the plates is six months from the date of manufacture.

Checkout
Managers of the company will answer all
questions by phone: