The door can be operated in an industrial facilities, in areas with a temperate and cold climate, in closed heated and ventilated rooms at an ambient temperature of -25 to +40 ° C with a relative humidity of up to 80%.
In case of operation of the door from the side of the street, installation should be carried out in a cold vestibule to prevent possible formation of condensate on the surface and, as a result, deformation of finishing materials.
To avoid fading of the cover of the door block, installation should be carried out using a protective visor in order to prevent sunlight and precipitation from reaching the surface of the door block.
It is not allowed to close the door leaf with extended lock bolts or bolts. This can lead to failure of the lock mechanisms and deformation of the crossbars.
It is not allowed to get foreign objects into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during the period of repair and construction work.
It is forbidden to install additional equipment or accessories, as well as to independently replace or adjust individual parts without consulting the manufacturer.
The maintenance of decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.
If the door systems are used for other purposes, the manufacturer is not responsible for their integrity and correct operation.
It is recommended to lubricate the hinge assembly with a thin layer of grease every 6 months.
