en
Home
Catalog
Contacts
en
Call back Dealer account
420 474 319 111 +420 474 319 111 kadan@doorhan.com
Sektionaltore
Türen
Rollläden und Rolltore
Rolltore aus Stahlprofilen
Industrieausstattung
Stahleingangstüren
Zaunsysteme aus Schweißgitter
Automation
Rollladenautomation
Gebäude
Mineralwolle
Sandwichpaneele
Catalog
Home
Catalog
Industrieausstattung
Schnelllauf-Rolltore
Schnelllauf-Rolltore der Serie SPEEDROLL SDO

Schnelllauf-Rolltore der Serie SPEEDROLL SDO

Sektionaltore
Türen
Rollläden und Rolltore
Rolltore aus Stahlprofilen
Industrieausstattung
Stahleingangstüren
Zaunsysteme aus Schweißgitter
Automation
Rollladenautomation
Gebäude
Mineralwolle
Sandwichpaneele

Außen-Schnelllauf-Rolltor SPEEDROLL SDO mit hoher Windstabilität

Das Schnelllauf-Rolltor SPEEDROLL SDO ist für Außenöffnungen von Industriegebäuden, Speditionen und Logistikterminals konzipiert. Es schützt das Gebäudeinnere zuverlässig vor Witterungseinflüssen und gewährleistet gleichzeitig einen schnellen Durchgangsverkehr für Lastkraftwagen und Stapler.

Im Torbehang integrierte Windversteifungsprofile und robuste Führungsschienen verleihen dem Tor eine hohe Standfestigkeit gegenüber Windlasten. Die zügigen Bewegungsabläufe verkürzen die Zeit, in der das Tor offen steht, und halten den Energieverlust an der Gebäudehülle gering.

Ausgestattet mit einem leistungsstarken Industrieantrieb und Frequenzsteuerung arbeitet das SPEEDROLL SDO zuverlässig bei intensiver Taktung. Sicherheitslichtschranken und eine untere Kontaktleiste gewährleisten einen kontrollierten Betrieb nach den europäischen Sicherheitsanforderungen.

Häufig gestellte Fragen zur Serie SPEEDROLL SDO

Wie unterscheidet sich die Serie SDO von der Innenserie SDI?

Die Serie SDO verfügt über integrierte Windversteifungsprofile und verstärkte Führungsschienen, um äußeren Winddrücken standzuhalten.

Welche Windlasten kann das SPEEDROLL SDO aufnehmen?

Die Konstruktion ist für mittlere bis hohe Windlasten nach EN 12424 ausgelegt, abhängig von den gewählten Torabmessungen.

Wie verhält sich das Tor bei Stromausfall?

Für den Notbetrieb steht eine manuelle Nothandbetätigung zur Verfügung, um das Tor auch ohne Spannungsversorgung zu öffnen.

Application:
Warehouse complexes. Industrial facilities
Order with installation
Order with installation
Order with installation
Advantages
High speed gate
High opening speed — up to 2.0 m/s.
Possibility of automation
Reliable automation of our own production.
Additional options
Possibility of installing various additional equipment: photocells, key buttons, drive and rack heating systems, etc.
Frost resistance
Stable operation at significant negative temperatures.
Extended basic equipment solution
A set of safety devices as standard.
High speed gate
High opening speed — up to 2.0 m/s.
Possibility of automation
Reliable automation of our own production.
Additional options
Possibility of installing various additional equipment: photocells, key buttons, drive and rack heating systems, etc.
Frost resistance
Stable operation at significant negative temperatures.
Extended basic equipment solution
A set of safety devices as standard.
Design
Surface type
Frame colors
Door frame – zinc-coated steel, unpainted
Door frame – zinc-coated steel, unpainted
Door frame – ASIS 304 stainless steel
Door frame – ASIS 304 stainless steel
RAL 9010 Pure white
RAL 9010 Pure white
RAL 5002 Ultramarine blue
RAL 5002 Ultramarine blue
RAL 6026 Opal green
RAL 6026 Opal green
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 1003 Signal yellow
RAL 1003 Signal yellow
RAL 3002 Carmine red
RAL 3002 Carmine red
RAL 2004 Pure orange
RAL 2004 Pure orange
Equipment
Standard
Optional
Tracks and track covers made of zinc-caoated steel

Tracks and track covers made of zinc-caoated steel

Zinc-caoated shaft, diameter 90/130 mm

Zinc-caoated shaft, diameter 90/130 mm

Guide rails — extruded polyethylene

Guide rails — extruded polyethylene

Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm

Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm

Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter

Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter

Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain

Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain

Control unit housing made of AISI304 stainless steel.

Control unit housing made of AISI304 stainless steel.

Heating of the drive and tracks

Heating of the drive and tracks

When closing, if the sensitive lower edge touches an obstacle, the sensor sends a signal via radio to the control unit to open the gate; In the event of a power failure, the gate opens automatically using a counterweight.

When closing, if the sensitive lower edge touches an obstacle, the sensor sends a signal via radio to the control unit to open the gate; In the event of a power failure, the gate opens automatically using a counterweight.

Technical description
Size Table
Construction
Standard Construction
Specifications
Operating Conditions
Parameters
Value
Opening width, mm
1,200–5,700
Opening height, mm
1,800–5,800
Headroom, mm
From 450
Sideroom clearance, mm
From 225
  1. Electric drive
  2. Shaft
  3. Shaft box
  4. Gate leaf
  5. Transparent insert (window/panel)
  6. Stand
  7. Guide for moving the web
  8. Bottom edge of the canvas
  9. Photocell
  10. Control unit
  11. Counterbalance

General view of a gate with a drive from the side (drive on the left/drive on the right).

General view of a gate with a drive from the side (drive on the left/drive on the right).

Symbol, parameter name Calculation formula
H, mm Opening height 1,600–5,700
B, mm Opening width 1,800–5,800
General view of a gate with a drive from the front (front left/front right).

General view of a gate with a drive from the front (front left/front right).

Symbol, parameter name Calculation formula
H, mm Opening height 1,600–5,700
B, mm Opening width 1,800–5,800
Parameter Value Notes
Wind load, Pa CLASS1 (up to 82) For gates up to 6,000 × 6,000 mm
Wind load, Pa CLASS2 (up to 90) For gates up to 5,000 × 5,000 mm
Opening speed, m/s 2.0 For gates up to 3,000 × 3,000 mm
Opening speed, m/s 1.5 For gates up to 5,000 × 5,000 mm
Opening speed, m/s 1.0 For gates up to 6,000 × 6,000 mm
Closing speed, m/s 0.5
Operating temperature range, °С -30...+50 When using the rack and drive heating system; when operating in a temperature range of -16...-30 °C, the gate design does not have reinforcement on the leaf, and transparent sections cannot be installed: the “Security Profile” option is not available
Power, W 1,500
IP protection class IP54 End positions are tracked by encoder
Supply voltage, V 220 V / 50 Hz Single phase
Supply voltage, V 380 V / 50 Hz Three-phase
Number of cycles 1,500,000 Depends on operating conditions
Wind load, Pa CLASS3 (up to 120) For gates up to 3,000 × 3,000 mm

Wind load resistance for SpeedRoll series doors is given for the door in the closed position. Gates are not used in places with unstable and increased wind loads caused by natural or man-made factors, such as:
- buildings located on sea coasts or in the mountains;
- multi-level heated underground parking lots with multiple entrances and exits;
- production with powerful supply and exhaust ventilation;
- in buildings of complex configuration with many gate openings, where strong drafts may occur. If one or more of the above factors are present, it is recommended to use a SpeedFold series door or a HSSD series spiral door.

To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.

Manual opening and closing of the gate is done using a crank.

Do not subject the gate to impacts or interfere with its free opening and closing.

Do not allow the PVC sheet guide to get dirty.

It is prohibited to stand in the opening while the gate is opening and closing to avoid injury.

Make sure that there are no foreign objects in the opening when opening and closing the gate.

For gates installed outside the building and used at temperatures below -15 °C, operation of the door leaf with windows is not allowed.

The self-healing function of the door leaf in the guides is used to operate the gate in emergency conditions, in the event of an unintentional collision with a vehicle; it is not intended to work when the door leaf is deliberately and systematically knocked out of the guides. The functionality of the function is ensured by the possibility of the “zipper”, installed on the door leaf from plastic guides, coming out. The functionality of the function cannot be ensured in the event of impacts that exceed the strength parameters of the individual components of the web and system elements. For example, in the event of a collision with a road surface at high speed, impacts with sharp objects, impacts on the top of the gate with raised forks of a forklift, etc.

Additional Information print

The DoorHan concern loads gates onto trucks using a hydraulic crane or forklift with a fork of at least 2 m. The buyer or installer must provide the same equipment for moving the packaged gates. The plug should fit under the wooden pallet provided by the manufacturer and protrude from the other side. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.

Warranty print

The buyer is provided with a performance guarantee for high-speed rolling gates produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.

New Products
DoorHan SERVO drive (220 V).

DoorHan SERVO drive (220 V).

Design
Surface type
Door frame – zinc-coated steel, unpainted
Door frame – zinc-coated steel, unpainted
Door frame – ASIS 304 stainless steel
Door frame – ASIS 304 stainless steel
Frame colors
RAL 9010 Pure white
RAL 9010 Pure white
RAL 5002 Ultramarine blue
RAL 5002 Ultramarine blue
RAL 6026 Opal green
RAL 6026 Opal green
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 1003 Signal yellow
RAL 1003 Signal yellow
RAL 3002 Carmine red
RAL 3002 Carmine red
RAL 2004 Pure orange
RAL 2004 Pure orange
Equipment
Standard
Tracks and track covers made of zinc-caoated steel

Tracks and track covers made of zinc-caoated steel

Zinc-caoated shaft, diameter 90/130 mm

Zinc-caoated shaft, diameter 90/130 mm

Guide rails — extruded polyethylene

Guide rails — extruded polyethylene

Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm

Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm

Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter

Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter

Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain

Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain

Optional
Control unit housing made of AISI304 stainless steel.

Control unit housing made of AISI304 stainless steel.

Heating of the drive and tracks

Heating of the drive and tracks

When closing, if the sensitive lower edge touches an obstacle, the sensor sends a signal via radio to the control unit to open the gate; In the event of a power failure, the gate opens automatically using a counterweight.

When closing, if the sensitive lower edge touches an obstacle, the sensor sends a signal via radio to the control unit to open the gate; In the event of a power failure, the gate opens automatically using a counterweight.

Technical description
Size Table
Parameters
Value
Opening width, mm
1,200–5,700
Opening height, mm
1,800–5,800
Headroom, mm
From 450
Sideroom clearance, mm
From 225
Construction
  1. Electric drive
  2. Shaft
  3. Shaft box
  4. Gate leaf
  5. Transparent insert (window/panel)
  6. Stand
  7. Guide for moving the web
  8. Bottom edge of the canvas
  9. Photocell
  10. Control unit
  11. Counterbalance
Standard Construction

General view of a gate with a drive from the side (drive on the left/drive on the right).

General view of a gate with a drive from the side (drive on the left/drive on the right).

Symbol, parameter name Calculation formula
H, mm Opening height 1,600–5,700
B, mm Opening width 1,800–5,800
General view of a gate with a drive from the front (front left/front right).

General view of a gate with a drive from the front (front left/front right).

Symbol, parameter name Calculation formula
H, mm Opening height 1,600–5,700
B, mm Opening width 1,800–5,800
Specifications
Parameter Value Notes
Wind load, Pa CLASS1 (up to 82) For gates up to 6,000 × 6,000 mm
Wind load, Pa CLASS2 (up to 90) For gates up to 5,000 × 5,000 mm
Opening speed, m/s 2.0 For gates up to 3,000 × 3,000 mm
Opening speed, m/s 1.5 For gates up to 5,000 × 5,000 mm
Opening speed, m/s 1.0 For gates up to 6,000 × 6,000 mm
Closing speed, m/s 0.5
Operating temperature range, °С -30...+50 When using the rack and drive heating system; when operating in a temperature range of -16...-30 °C, the gate design does not have reinforcement on the leaf, and transparent sections cannot be installed: the “Security Profile” option is not available
Power, W 1,500
IP protection class IP54 End positions are tracked by encoder
Supply voltage, V 220 V / 50 Hz Single phase
Supply voltage, V 380 V / 50 Hz Three-phase
Number of cycles 1,500,000 Depends on operating conditions
Wind load, Pa CLASS3 (up to 120) For gates up to 3,000 × 3,000 mm
Operating Conditions

Wind load resistance for SpeedRoll series doors is given for the door in the closed position. Gates are not used in places with unstable and increased wind loads caused by natural or man-made factors, such as:
- buildings located on sea coasts or in the mountains;
- multi-level heated underground parking lots with multiple entrances and exits;
- production with powerful supply and exhaust ventilation;
- in buildings of complex configuration with many gate openings, where strong drafts may occur. If one or more of the above factors are present, it is recommended to use a SpeedFold series door or a HSSD series spiral door.

To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.

Manual opening and closing of the gate is done using a crank.

Do not subject the gate to impacts or interfere with its free opening and closing.

Do not allow the PVC sheet guide to get dirty.

It is prohibited to stand in the opening while the gate is opening and closing to avoid injury.

Make sure that there are no foreign objects in the opening when opening and closing the gate.

For gates installed outside the building and used at temperatures below -15 °C, operation of the door leaf with windows is not allowed.

The self-healing function of the door leaf in the guides is used to operate the gate in emergency conditions, in the event of an unintentional collision with a vehicle; it is not intended to work when the door leaf is deliberately and systematically knocked out of the guides. The functionality of the function is ensured by the possibility of the “zipper”, installed on the door leaf from plastic guides, coming out. The functionality of the function cannot be ensured in the event of impacts that exceed the strength parameters of the individual components of the web and system elements. For example, in the event of a collision with a road surface at high speed, impacts with sharp objects, impacts on the top of the gate with raised forks of a forklift, etc.

Additional Information

The DoorHan concern loads gates onto trucks using a hydraulic crane or forklift with a fork of at least 2 m. The buyer or installer must provide the same equipment for moving the packaged gates. The plug should fit under the wooden pallet provided by the manufacturer and protrude from the other side. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.

Warranty

The buyer is provided with a performance guarantee for high-speed rolling gates produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.

Checkout
Managers of the company will answer all
questions by phone:
420 474 319 111
CALL BACK