Catalog
Catalog

Leveling platform with a retractable ramp, console type, DSMC series

The DSMC series console-type retractable ramp platform is the most effective device for providing access for a forklift from a warehouse to a vehicle body. It is used in cases where it is necessary to position the ramp in the body as accurately as possible, as well as when loading cars from the side. Ramp segments provide the ability to work with vehicles whose width is less than the width of the platform.
Application:
  • Warehouse complexes
Advantages
The design of the platform provides the most accurate positioning of the ramp in the car body.
It is possible to load a cargo that is positioned close to the back side board of the car.
The ability to organize a completely “warm” dock: the gates are closed in front of the platform, the length of the ramp is 1,000 mm.
The safety system of the hydraulic installation will immediately stop the platform if a hose rupture or a truck would leave during operation.
Availability of specialized "winter packages" for use in areas with extremely low temperatures.
Shot blasting of the metal before powder coating.
The design of the platform provides the most accurate positioning of the ramp in the car body.
It is possible to load a cargo that is positioned close to the back side board of the car.
The ability to organize a completely “warm” dock: the gates are closed in front of the platform, the length of the ramp is 1,000 mm.
The safety system of the hydraulic installation will immediately stop the platform if a hose rupture or a truck would leave during operation.
Availability of specialized "winter packages" for use in areas with extremely low temperatures.
Shot blasting of the metal before powder coating.
Design
Colour Options
RAL 9005 black
RAL 9005 black
RAL 5005 blue
RAL 5005 blue
Equipment
Standard
Optional
Leveling platform

Leveling platform

Connection for control unit

Connection for control unit

Side seal

Side seal

Control unit DCUT-1. Basic. Power supply 380 V 3 phases. The platform is controlled by holding the button. Return to the parking position by holding the button. Blocking the platform when the gate is closed.

Control unit DCUT-1. Basic. Power supply 380 V 3 phases. The platform is controlled by holding the button. Return to the parking position by holding the button. Blocking the platform when the gate is closed.

Control unit DCUT-2. With extended functions. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display.

Control unit DCUT-2. With extended functions. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display.

DCUT-3 control unit. A complex device for controlling the elements of the reloading dock. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display. Gate drive control. Inflatable dock control.

DCUT-3 control unit. A complex device for controlling the elements of the reloading dock. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display. Gate drive control. Inflatable dock control.

Photoelectric sensor. Designed for interlocking platforms and sectional doors. When the gate is closed, the sensor blocks the platform control to avoid damage to the door.

Photoelectric sensor. Designed for interlocking platforms and sectional doors. When the gate is closed, the sensor blocks the platform control to avoid damage to the door.

The wheel guides are designed to ensure fast and accurate parking of the vehicle in the dock and to protect dock shelters and building walls from damage. The guides are designed to minimize possible contact with the vehicle wheel rim. They are steel pipes with a diameter of 159 mm with taps for fastening. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized. Guides are installed on the site in front of the dock in two ways - on anchor bolts and with the help of concreting.

The wheel guides are designed to ensure fast and accurate parking of the vehicle in the dock and to protect dock shelters and building walls from damage. The guides are designed to minimize possible contact with the vehicle wheel rim. They are steel pipes with a diameter of 159 mm with taps for fastening. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized. Guides are installed on the site in front of the dock in two ways - on anchor bolts and with the help of concreting.

Fences are installed inside the building and are designed to protect the walls of the building from damage by a forklift. They ensure the correct and safe movement of the forklift through the warehouse and when approaching the dock. Fences are round pipes with a diameter of 100-159 mm, in addition, they can have an arbitrary shape and be made according to the customer's sketches. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fences are installed inside the building and are designed to protect the walls of the building from damage by a forklift. They ensure the correct and safe movement of the forklift through the warehouse and when approaching the dock. Fences are round pipes with a diameter of 100-159 mm, in addition, they can have an arbitrary shape and be made according to the customer's sketches. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fender posts are designed to protect the corner posts of the gate from damage in the event of a collision with a forklift. The posts are installed indoors in front of the racks. The diameter of the baffle column is from 100 to 159 mm. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fender posts are designed to protect the corner posts of the gate from damage in the event of a collision with a forklift. The posts are installed indoors in front of the racks. The diameter of the baffle column is from 100 to 159 mm. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Frame for concreting. It is made in accordance with the mounting dimensions of the leveling platform.

Frame for concreting. It is made in accordance with the mounting dimensions of the leveling platform.

Traffic light TRAFFICLIGHT-LED. It is designed to ensure the safe movement of a truck and a loader at the time of approach / departure and the loading process. Can be connected to DCUT-2, DCUT-3 series control units.

Traffic light TRAFFICLIGHT-LED. It is designed to ensure the safe movement of a truck and a loader at the time of approach / departure and the loading process. Can be connected to DCUT-2, DCUT-3 series control units.

Article

Article "BR250x250x100". Base. Rubber bumper 250 × 250 × 100 mm. Provides a safe truck access to the loading area and prevents damage to the walls of the building. For installation dimensions, see the Drawings section.

Article

Article "BR450x250x100". Base. Rubber bumper 450 × 250 × 100 mm. Provides a safe truck access to the loading area and prevents damage to the walls of the building. For installation dimensions, see the Drawings section.

Article

Article "BRC510x250x330". Built on the basis of a 450 × 250 × 100 mm bumper. Rubber bumper 510 × 250 × 330 mm (external dimensions) cantilever type. Provides a safe truck access to the loading area and prevents damage to the walls of the building. It is used when the height of the car body can be greater than the height of the ramp. For installation dimensions, see the Drawings section.

Article

Article "BRM610x250x175". Built on the basis of a 450 × 250 × 100 mm bumper. Rubber bumper 610 × 250 × 175 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to mobility. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the Drawings section.

Article

Article "BRM600x364x110". Built on the basis of a bumper 450 × 250 × 100 mm. Rubber bumper 600 × 364 × 110 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to mobility. For installation dimensions, see the "Drawings" section.

Article

Article "BRSP (16) 465x250x165". Built on the basis of a 450 × 250 × 100 mm bumper. Bumper 465 × 250 × 16 mm (external dimensions) with 16 mm thick steel working pad. It consists of a filler that is shock-absorbing over the entire surface (rubber bumper 450 × 250 × 100 mm), closed with a strong external steel plate. Protective lining on the bumper is used to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. For installation dimensions, see the Drawings section.

Article

Article "BRSP (16) 465x250x165S". Built on the basis of a 450 × 250 × 100 mm bumper. Bumper 465 × 250 × 165 mm (external dimensions) with 16 mm thick steel working pad and parking sensor. It consists of a shock-absorbing filler over the entire surface (rubber bumper 450 × 250 × 100 mm), covered with a strong external steel plate and a parking sensor that ensures safe docking of a truck. Protective lining on the bumper is used to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Used in a system with a parking radar. For installation dimensions, see the Drawings section.

Article

Article "BS500x255x205". Built on the basis of a bumper 450 × 250 × 100 mm. Steel bumper 500 × 255 × 205 mm (external dimensions) with damper insert. It is a hybrid bumper, which is a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumb and a movable, durable outer steel cover that can move following the movements of the car body. The metal case on the bumper serves to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading operations. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the "Drawings" section.

Article

Article "BS800x255x205". Built on the basis of a bumper 450 × 250 × 100 mm. Steel bumper 800 × 255 × 205 mm (external dimensions) with damper insert. It is a hybrid bumper, which is a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumb and a movable, durable outer steel cover that can move following the movements of the car body. The metal case on the bumper serves to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading operations. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the "Drawings" section.

LED lamp with dock lighting bracket.

LED lamp with dock lighting bracket.

Technical description
Size Table
Construction
Standard Construction
Specifications
Operating Conditions
Parameters
Value
Length of dock leveler with load capacity of 6 000 kg (60 kN)*, mm
2 500 / 3 000 / 3 500 / 4 000
Length of dock leveler with load capacity of 10 000 kg (100 kN)*, mm
2 500 / 3 000 / 3 500 / 4 000
Dock leveler width, mm
2 000 / 2 200 / 2 400
  1. Ramp
  2. Ramp cylinder
  3. Lifting cylinder
  4. Hydraulic pump
  5. Platform cover
  6. Farm
  7. Signal yellow-black stripe
  8. Control box

Standard lip 500 mm. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width

Standard lip 500 mm. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width

Ramp 1,000 mm. Chamfer 35 mm. Elongated, one-piece, without segments, rectangular in shape for use with a fleet of cars of the same width in cases where the length of the ramp of 500 mm is not enough or for organizing a “warm” dock in the case when the gate is lowered in front of the platform, closing the thermal contour of the building.

Ramp 1,000 mm. Chamfer 35 mm. Elongated, one-piece, without segments, rectangular in shape for use with a fleet of cars of the same width in cases where the length of the ramp of 500 mm is not enough or for organizing a “warm” dock in the case when the gate is lowered in front of the platform, closing the thermal contour of the building.

Segmented ramp (3 segments). Chamfer 35 mm. Performed with 3 segments. Fully retractable, it allows the use of the central, as well as one or two side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Segmented ramp (3 segments). Chamfer 35 mm. Performed with 3 segments. Fully retractable, it allows the use of the central, as well as one or two side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Segmented ramp (5 segments). Chamfer 35 mm. Performed with 5 segments. Fully retractable, it allows the use of the central, as well as from one to four side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Segmented ramp (5 segments). Chamfer 35 mm. Performed with 5 segments. Fully retractable, it allows the use of the central, as well as from one to four side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Wedge-shaped ramp. Chamfer 35 mm. Whole, without segments. It is used in cases where the car is parked not exactly in the center of the dock, avoiding damage to the car, as well as for working with cars of different widths.

Wedge-shaped ramp. Chamfer 35 mm. Whole, without segments. It is used in cases where the car is parked not exactly in the center of the dock, avoiding damage to the car, as well as for working with cars of different widths.

Ramp without folding. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width, in case of using loaders with low and very low clearance.

Ramp without folding. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width, in case of using loaders with low and very low clearance.

Parameter Value Notes
Length, mm 2500 / 3000 / 3500 / 4000
Weight, kg 1000 / 1100 / 1200 / 1350
Load capacity, kg (kN) 6 000 (60) / 10 000 (100)
Maximum point load, Н/mm² 1,3 top sheet 8 mm
Maximum point load, Н/mm² 6,5 top sheet 10 mm
Power, W 1 100 hydraulic pump electric drive
Supply voltage, V 380, 3 phase
Supply voltage, V 24 control voltage
IP protection class IP54
Preparation of steel surface before application of paints, class Sa 2
Thickness of paint layer, not less than, mkm 60
Operating temperature range, °С -30 to +50
Number of lifting cylinders, pcs. 2
Hydraulic fluid Mobil DTE10 EXCEL

1. To ensure reliable and trouble-free operation of the leveling platform, it is recommended to carry out its technical inspection and maintenance on a regular basis.

2. When operating the dock leveler, make sure that there are no people or goods in the working area.

3. When the dock leveler is in operation, the gate must be fully open.

4. Make sure the car is parked in the correct position. If there is a risk of vehicle movement, secure the wheels with wheel stoppers.

5. Before loading/unloading, make sure that the full width of the ramp lies in the car body. The minimum distance for the ramp to enter the car body is 100 mm.

6. The control box must be located in such a way that the operator can always control the loading / unloading process.

7. For standard inflatable wheel loaders, dock levelers with a point load of 1.3 N/mm2 are acceptable.

8. Loading equipment with a high point load, such as electric stackers, pallet trucks, reach trucks, order pickers on polyurethane wheels, must use platforms with a point load of 6.5 N/mm².

Additional Information print

1. Equipment for lifting and mounting:

- forklift (minimum load capacity - 35 kN, fork length 1 not less than 2,000 mm);

- crane (minimum lifting capacity - 20 kN).

2. Equipment for installation:

- welding machine (5-200 A) or similar;

- electrodes for welding 3 mm.

Warranty print

The buyer is provided with guarantee of the leveling platform with a retractable ramp manufactured by the DoorHan for a period of 2 years for retail and dealer orders from the date of purchase.

New Products
New! Option to connect to the network using a standard plug.

New! Option to connect to the network using a standard plug.

Design
Colour Options
RAL 9005 black
RAL 9005 black
RAL 5005 blue
RAL 5005 blue
Equipment
Standard
Leveling platform

Leveling platform

Connection for control unit

Connection for control unit

Side seal

Side seal

Optional
Control unit DCUT-1. Basic. Power supply 380 V 3 phases. The platform is controlled by holding the button. Return to the parking position by holding the button. Blocking the platform when the gate is closed.

Control unit DCUT-1. Basic. Power supply 380 V 3 phases. The platform is controlled by holding the button. Return to the parking position by holding the button. Blocking the platform when the gate is closed.

Control unit DCUT-2. With extended functions. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display.

Control unit DCUT-2. With extended functions. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display.

DCUT-3 control unit. A complex device for controlling the elements of the reloading dock. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display. Gate drive control. Inflatable dock control.

DCUT-3 control unit. A complex device for controlling the elements of the reloading dock. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display. Gate drive control. Inflatable dock control.

Photoelectric sensor. Designed for interlocking platforms and sectional doors. When the gate is closed, the sensor blocks the platform control to avoid damage to the door.

Photoelectric sensor. Designed for interlocking platforms and sectional doors. When the gate is closed, the sensor blocks the platform control to avoid damage to the door.

The wheel guides are designed to ensure fast and accurate parking of the vehicle in the dock and to protect dock shelters and building walls from damage. The guides are designed to minimize possible contact with the vehicle wheel rim. They are steel pipes with a diameter of 159 mm with taps for fastening. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized. Guides are installed on the site in front of the dock in two ways - on anchor bolts and with the help of concreting.

The wheel guides are designed to ensure fast and accurate parking of the vehicle in the dock and to protect dock shelters and building walls from damage. The guides are designed to minimize possible contact with the vehicle wheel rim. They are steel pipes with a diameter of 159 mm with taps for fastening. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized. Guides are installed on the site in front of the dock in two ways - on anchor bolts and with the help of concreting.

Fences are installed inside the building and are designed to protect the walls of the building from damage by a forklift. They ensure the correct and safe movement of the forklift through the warehouse and when approaching the dock. Fences are round pipes with a diameter of 100-159 mm, in addition, they can have an arbitrary shape and be made according to the customer's sketches. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fences are installed inside the building and are designed to protect the walls of the building from damage by a forklift. They ensure the correct and safe movement of the forklift through the warehouse and when approaching the dock. Fences are round pipes with a diameter of 100-159 mm, in addition, they can have an arbitrary shape and be made according to the customer's sketches. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fender posts are designed to protect the corner posts of the gate from damage in the event of a collision with a forklift. The posts are installed indoors in front of the racks. The diameter of the baffle column is from 100 to 159 mm. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fender posts are designed to protect the corner posts of the gate from damage in the event of a collision with a forklift. The posts are installed indoors in front of the racks. The diameter of the baffle column is from 100 to 159 mm. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Frame for concreting. It is made in accordance with the mounting dimensions of the leveling platform.

Frame for concreting. It is made in accordance with the mounting dimensions of the leveling platform.

Traffic light TRAFFICLIGHT-LED. It is designed to ensure the safe movement of a truck and a loader at the time of approach / departure and the loading process. Can be connected to DCUT-2, DCUT-3 series control units.

Traffic light TRAFFICLIGHT-LED. It is designed to ensure the safe movement of a truck and a loader at the time of approach / departure and the loading process. Can be connected to DCUT-2, DCUT-3 series control units.

Article

Article "BR250x250x100". Base. Rubber bumper 250 × 250 × 100 mm. Provides a safe truck access to the loading area and prevents damage to the walls of the building. For installation dimensions, see the Drawings section.

Article

Article "BR450x250x100". Base. Rubber bumper 450 × 250 × 100 mm. Provides a safe truck access to the loading area and prevents damage to the walls of the building. For installation dimensions, see the Drawings section.

Article

Article "BRC510x250x330". Built on the basis of a 450 × 250 × 100 mm bumper. Rubber bumper 510 × 250 × 330 mm (external dimensions) cantilever type. Provides a safe truck access to the loading area and prevents damage to the walls of the building. It is used when the height of the car body can be greater than the height of the ramp. For installation dimensions, see the Drawings section.

Article

Article "BRM610x250x175". Built on the basis of a 450 × 250 × 100 mm bumper. Rubber bumper 610 × 250 × 175 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to mobility. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the Drawings section.

Article

Article "BRM600x364x110". Built on the basis of a bumper 450 × 250 × 100 mm. Rubber bumper 600 × 364 × 110 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to mobility. For installation dimensions, see the "Drawings" section.

Article

Article "BRSP (16) 465x250x165". Built on the basis of a 450 × 250 × 100 mm bumper. Bumper 465 × 250 × 16 mm (external dimensions) with 16 mm thick steel working pad. It consists of a filler that is shock-absorbing over the entire surface (rubber bumper 450 × 250 × 100 mm), closed with a strong external steel plate. Protective lining on the bumper is used to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. For installation dimensions, see the Drawings section.

Article

Article "BRSP (16) 465x250x165S". Built on the basis of a 450 × 250 × 100 mm bumper. Bumper 465 × 250 × 165 mm (external dimensions) with 16 mm thick steel working pad and parking sensor. It consists of a shock-absorbing filler over the entire surface (rubber bumper 450 × 250 × 100 mm), covered with a strong external steel plate and a parking sensor that ensures safe docking of a truck. Protective lining on the bumper is used to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Used in a system with a parking radar. For installation dimensions, see the Drawings section.

Article

Article "BS500x255x205". Built on the basis of a bumper 450 × 250 × 100 mm. Steel bumper 500 × 255 × 205 mm (external dimensions) with damper insert. It is a hybrid bumper, which is a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumb and a movable, durable outer steel cover that can move following the movements of the car body. The metal case on the bumper serves to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading operations. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the "Drawings" section.

Article

Article "BS800x255x205". Built on the basis of a bumper 450 × 250 × 100 mm. Steel bumper 800 × 255 × 205 mm (external dimensions) with damper insert. It is a hybrid bumper, which is a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumb and a movable, durable outer steel cover that can move following the movements of the car body. The metal case on the bumper serves to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading operations. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the "Drawings" section.

LED lamp with dock lighting bracket.

LED lamp with dock lighting bracket.

Technical description
Size Table
Parameters
Value
Length of dock leveler with load capacity of 6 000 kg (60 kN)*, mm
2 500 / 3 000 / 3 500 / 4 000
Length of dock leveler with load capacity of 10 000 kg (100 kN)*, mm
2 500 / 3 000 / 3 500 / 4 000
Dock leveler width, mm
2 000 / 2 200 / 2 400
Construction
  1. Ramp
  2. Ramp cylinder
  3. Lifting cylinder
  4. Hydraulic pump
  5. Platform cover
  6. Farm
  7. Signal yellow-black stripe
  8. Control box
Standard Construction

Standard lip 500 mm. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width

Standard lip 500 mm. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width

Ramp 1,000 mm. Chamfer 35 mm. Elongated, one-piece, without segments, rectangular in shape for use with a fleet of cars of the same width in cases where the length of the ramp of 500 mm is not enough or for organizing a “warm” dock in the case when the gate is lowered in front of the platform, closing the thermal contour of the building.

Ramp 1,000 mm. Chamfer 35 mm. Elongated, one-piece, without segments, rectangular in shape for use with a fleet of cars of the same width in cases where the length of the ramp of 500 mm is not enough or for organizing a “warm” dock in the case when the gate is lowered in front of the platform, closing the thermal contour of the building.

Segmented ramp (3 segments). Chamfer 35 mm. Performed with 3 segments. Fully retractable, it allows the use of the central, as well as one or two side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Segmented ramp (3 segments). Chamfer 35 mm. Performed with 3 segments. Fully retractable, it allows the use of the central, as well as one or two side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Segmented ramp (5 segments). Chamfer 35 mm. Performed with 5 segments. Fully retractable, it allows the use of the central, as well as from one to four side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Segmented ramp (5 segments). Chamfer 35 mm. Performed with 5 segments. Fully retractable, it allows the use of the central, as well as from one to four side segments. Allows the platform to be used with vehicles that are smaller than the standard width. Only available for platforms with a capacity of 6,000 kg.

Wedge-shaped ramp. Chamfer 35 mm. Whole, without segments. It is used in cases where the car is parked not exactly in the center of the dock, avoiding damage to the car, as well as for working with cars of different widths.

Wedge-shaped ramp. Chamfer 35 mm. Whole, without segments. It is used in cases where the car is parked not exactly in the center of the dock, avoiding damage to the car, as well as for working with cars of different widths.

Ramp without folding. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width, in case of using loaders with low and very low clearance.

Ramp without folding. Chamfer 35 mm. One-piece, without segments, rectangular shape for use with a fleet of vehicles of the same width, in case of using loaders with low and very low clearance.

Specifications
Parameter Value Notes
Length, mm 2500 / 3000 / 3500 / 4000
Weight, kg 1000 / 1100 / 1200 / 1350
Load capacity, kg (kN) 6 000 (60) / 10 000 (100)
Maximum point load, Н/mm² 1,3 top sheet 8 mm
Maximum point load, Н/mm² 6,5 top sheet 10 mm
Power, W 1 100 hydraulic pump electric drive
Supply voltage, V 380, 3 phase
Supply voltage, V 24 control voltage
IP protection class IP54
Preparation of steel surface before application of paints, class Sa 2
Thickness of paint layer, not less than, mkm 60
Operating temperature range, °С -30 to +50
Number of lifting cylinders, pcs. 2
Hydraulic fluid Mobil DTE10 EXCEL
Operating Conditions

1. To ensure reliable and trouble-free operation of the leveling platform, it is recommended to carry out its technical inspection and maintenance on a regular basis.

2. When operating the dock leveler, make sure that there are no people or goods in the working area.

3. When the dock leveler is in operation, the gate must be fully open.

4. Make sure the car is parked in the correct position. If there is a risk of vehicle movement, secure the wheels with wheel stoppers.

5. Before loading/unloading, make sure that the full width of the ramp lies in the car body. The minimum distance for the ramp to enter the car body is 100 mm.

6. The control box must be located in such a way that the operator can always control the loading / unloading process.

7. For standard inflatable wheel loaders, dock levelers with a point load of 1.3 N/mm2 are acceptable.

8. Loading equipment with a high point load, such as electric stackers, pallet trucks, reach trucks, order pickers on polyurethane wheels, must use platforms with a point load of 6.5 N/mm².

Additional Information

1. Equipment for lifting and mounting:

- forklift (minimum load capacity - 35 kN, fork length 1 not less than 2,000 mm);

- crane (minimum lifting capacity - 20 kN).

2. Equipment for installation:

- welding machine (5-200 A) or similar;

- electrodes for welding 3 mm.

Warranty

The buyer is provided with guarantee of the leveling platform with a retractable ramp manufactured by the DoorHan for a period of 2 years for retail and dealer orders from the date of purchase.

Checkout
Managers of the company will answer all
questions by phone: